Vibrating decorative line XXZP-AB180-ZDX

1. This equipment is not only suitable for the vibration finishing of the workpiece, but also equipped with vibration drying equipment, so that the workpiece can quickly enter the drying process of the workpiece after deburring and polishing.

2. Vibration finishing uses the vibration deviation generated by the vibration motor to make the parts and abrasives produce a two-dimensional motion trajectory, so that the workpiece and the abrasives can grind each other to achieve the effect of surface finishing.

3. Vibration drying uses electric heating wire to heat the bottom of the working tank, which does not affect the operation of the workpiece in the working tank of the equipment.After the heating wire is heated, the heat is transferred to the drying medium (corn cob or walnut shell), and then the drying medium is continuously tumbling in the working tank of the equipment to quickly absorb the moisture on the surface of the workpiece and dry it.

4. The equipment can support the PLC automatic program to control the operation of vibration finishing and vibration drying. It can also support simple independent control of the electric cabinet, and manual control of the independent operation and joint operation of the two equipment.

1. Independent control electric cabinet: it is convenient for the safe operation of the equipment and protects the motor from overloading.Automatic PLC electric control cabinets are also available.

2. Inverter: It can adjust the running speed of the equipment motor, so as to achieve the effect of adjusting the vibration frequency.

3. Vibration dryer optional: double heating type and single heating type.

4. Vibration dryer: In order to prevent the workpiece from colliding with the metal of the working tank of the dryer, it can be lined with high-temperature resistant rubber.

5. Vibration dryer: dust-proof device can be configured.