Device model:XXZP-ZC300TG

This equipment is suitable for finishing the surface of the workpiece that is easy to be bumped during the grinding and polishing process, removing burrs, scale and chamfering of the workpiece surface.In the process of vibrating grinding and polishing, the workpiece is designed through grinding and polishing, so the workpiece and the workpiece will not collide with each other during the grinding and polishing process.Water and liquid are automatically added during the grinding and polishing process. After grinding and polishing, the abrasives and workpieces are automatically sorted. The sorted workpieces enter the next process or to the workpiece turnover box, and the abrasives return to the long tank machine for recycling grinding and polishing.

Main processed products: aluminum iron boron, aluminum die-casting parts, large machined parts, etc.

When the project was completed:2019年10月

Device model:XXZP-ZC2000A-ZDX

This equipment is suitable for removing scale and burrs on the surface of workpieces with relatively large dimensions, improving the surface roughness of the workpiece, and removing residual stress inside the workpiece.During the grinding and polishing process, an isolation plate can be added in the working tank of the finishing machine according to the requirements of the workpiece shape and size, so as to improve the efficiency of the equipment to process the workpiece and prevent the collision between the workpiece and the workpiece.

Main processed products: large bearing rings, gears, die castings, shafts, pipe fittings, etc.

When the project was completed:2014年4月

Device model:XXZP-B450-ZDX

The equipment is suitable for workpieces with small dimensions and complex shapes. During the grinding and polishing process, the equipment can be ground and polished with oil or water, especially for products with holes and grooves.During conventional grinding and polishing, the problem of abrasive sticking and grooves is caused by the abrasive becoming smaller and not separated in time.During the grinding and polishing process, materials are automatically loaded and water is added automatically. After grinding and polishing, the abrasives and workpieces are automatically sorted. The sorted workpieces enter the next process or to the workpiece turnover box, and the qualified abrasives flow back into the hydraulic hopper.

Main processed products: powder metallurgy products, pinions, die-casting parts, shafts, engine rocker arms, etc.

When the project was completed:2011年8月

Device model:XXZP-B980*2-ZDX

This equipment is mainly used for deburring and surface finishing of workpieces with the same size as the abrasive.The vibratory grinding and finishing line automatically loads materials, polishes and deburrs (automatically adds water and liquid during polishing and deburring), magnetic separation (vibration screening of workpieces and abrasives), workpiece conveying, washing and rust prevention, drying, and monitoring of equipment operation status System, soundproof room, sewage recycling after polishing and other functional components, usingPLCprogram control.Before use, according to the polishing requirements of different workpieces, set the corresponding process parameters. When using, just press the automatic operation button, the automatic line will run according to the set process parameters, and the parts will be polished. The entire polishing process and sewage circulation All use is controlled by the program to run automatically.

The whole set of equipment is in polishing operation, running noise70About decibels, the polished sewage is recycled after sewage treatment and ultrafiltration to achieve energy saving and reduction.Row.

The vibratory grinding and finishing line is equipped with a magnetic separator, which is especially suitable for the separation of iron parts and abrasives of the same size or after polishing of multi-size parts. The magnetic separator has a demagnetization function.After magnetization, the residual magnetism of the parts is less than0.2 mT.

Main processed products: powder metallurgy products, pinions, die castings, shafts, engine rocker arms, etc.

When the project was completed:2011年8月

Device model:XXZP-AB300-ZDX

This equipment is mainly used for deburring and surface finishing of workpieces after metal stamping.During the grinding and polishing process, materials are automatically loaded, water is added automatically, and the equipment automatically sorts and discharges the materials after the grinding and polishing time is up. The sorted workpieces enter the soaking conveyor to soak and clean the residual dirt on the surface of the workpieces during the polishing process. After cleaning The workpieces are transported to the workpiece turnover box.The polished sewage is recycled for grinding and polishing after being treated by sewage treatment equipment.

Main processed products: powder metallurgy products, metal stamping parts, etc.

When the project was completed:2020年10月

Device model:XXZP-B650*10-ZDX

This equipment is mainly suitable for the chamfering of flake workpieces made of magnetic materials, aluminum, iron and boron products. During the chamfering process, water and liquid are added automatically. The sorting mechanism is used for sorting, and the sorting uses the principle of drop. The chamfering abrasive automatically slides down to the abrasive hoist and enters the abrasive storage mechanism. Since the workpiece is flake, the workpiece and abrasive are screened with the conveyor running, and the workpiece enters the workpiece turnover box. In this way, the screening effectively prevents the missing corners of the workpiece during the screening process and improves the pass rate of the workpiece processing.One sorting mechanism can provide workpiece abrasive screening for multiple vibrating chamfering machines.

Main processed products: magnetic materials AlFeB, sheet workpieces.

When the project was completed:2021年9月

Device model:XXWS-40T/D

The equipment is mainly suitable for recycling the treated sewage after grinding and polishing. The equipment treats the amount of sewage every day40Ton per day, the treatment is mainly through the process of primary natural precipitation, secondary natural precipitation, inclined tube precipitation and other processes. The water after the sewage is settled in the inclined tube is pumped back for recycling. After the sedimentation, the sludge is filtered by the filter press Forms into lumps for easy handling.

Mainly used for: polishing sewage, cleaning sewage, etc.

When the project was completed:2021年6月

Device model:XXWP-240*2-ZDX

This equipment is mainly suitable for deburring and surface finishing of metal stamping parts.The equipment is equipped with hydraulic pressure, automatic feeding, vortex machine grinding and polishing (water and liquid are automatically added during the polishing process, and the liquid level is automatically controlled. If the water temperature is too high during the grinding process, the program will automatically control the replacement of new grinding water). After the grinding time is up, The eddy current automatically flips the workpiece and abrasive into the buffer bucket and returns to the original position. The vibration sorting and washing machine starts, and the buffer bucket rises slowly to send the workpiece abrasive evenly to the vibration sorting and washing equipment for sorting. The sorted workpiece enters the The next process or into the turnover box, the abrasive returns to the hydraulic hopper for the next batch of grinding and polishing.

Main processed products: powder metallurgy products, metal stamping parts, etc.

When the project was completed:2013年7月

Device model:XXZP-AB980-ZDX

This equipment is mainly suitable for large quantities of metal stamping parts to remove oxide skin, burrs and surface decoration on the surface of workpieces.The equipment is designed with functions such as automatic feeding, vibration polishing, vibration washing, anti-rust, vibration drying, etc. The set adoptsPLCProgram control, according to the polishing requirements of different workpieces, set the corresponding process parameters before use, just press the automatic operation button when using, the automatic line will run according to the set process parameters, and polish the workpieces, after the processing is completed Automatically stop, and the intermediate link is fully automatic without manual intervention.

Main processed products: metal stamping parts, bearings, etc.

When the project was completed:2011年12月